During the installation of metal barbed wire, it is easy to cause incomplete stretching due to winding, and the installation effect is not particularly good. At this time, it is necessary to use a tensioner for stretching.
When installing the metal barbed wire tightened with a tensioner, the effect is better. After installing the barbed wire net, it will be straighter. At the same time, the use of the barbed wire will be more economical. If the tensioner is not used to stretch the barbed wire, It's less beautiful.
When the ground is undulating, the method of installing barbed wire also needs to be changed accordingly, because the original installation method will not be able to achieve a protective effect.
Before installation, you need to select three points, namely the highest point (lowest) and the side lines on both sides. A good number of barbed wire posts can be installed gradually according to the hook arrangement of the barbed wire posts. Then the barbed wire can be installed with the ground. Move up and down to prevent the gap from being too large.
The barbed wire guardrail net uses stainless steel barbed wire, plastic-coated barbed wire, aluminum-coated barbed wire, galvanized barbed wire and other materials through a special drawing and strand design, which has a strong protection and protection effect. Widely used on both sides of highways, grasslands, gardens and other places.
Discarded barbed wire guardrail nets are usually sorted and recycled, classified and concentrated to better promote the better use of the entire highway guardrail net. Discarded metal guardrail nets are still common copper mesh profiles. Disassemble or throw away rusty and unnecessary materials, and the whole can be regenerated.
There are many important details that require special attention when barbed wire manufacturers produce barbed wire or bladed barbed wire. If they are slightly improper, unnecessary losses will be caused.
First of all, you need to pay attention to the material of the barbed wire, because the galvanized barbed wire itself includes cold plating and hot plating. The properties and prices of the two are obviously different, and it is easy to be confused if you are not careful.
Secondly, it is important to determine the processing process according to the material of the barbed wire. This is especially reflected in the hot-dip galvanized barbed wire, because the barbed wire with different treatment methods has some differences in the material and ductility of the wire. If it is processed If you don't pay attention during the process, it is easy to damage the zinc layer on the surface, which directly affects the anti-rust ability of the barbed wire.
Then there is the size of the barbed wire or bladed barbed wire. The more commonly used sizes are fine, especially for some special-shaped products, which need to be mentioned repeatedly by the barbed wire factory during the production process to avoid unnecessary losses.
Post time: Nov-15-2023