Airport guardrail net, also known as "Y-type security guard net", is composed of V-shaped bracket columns, reinforced welded sheet nets, security anti-theft connectors and hot-dip galvanized blade cages to form a high level of strength and safety protection. In recent years, it has been widely used in high-security places such as airports and military bases. Note: If razor wire and razor wire are installed on the top of the airport guardrail, the safety protection function will be greatly enhanced. It adopts anti-corrosion methods such as electroplating, hot plating, plastic spraying, and plastic dipping, and has excellent anti-aging, sun resistance, and weather resistance. Its products are beautiful in appearance and come in various colors, which not only serve as a fence, but also have a beautifying effect. Due to its high safety and good anti-climbing ability, the mesh connection method uses special SBS fasteners to effectively prevent artificial and destructive disassembly. The four horizontal bending reinforcements significantly increase the strength of the mesh surface.
Material: Excellent low carbon steel wire.
Standard: Use 5.0mm high-strength low-carbon steel wire for welding.
Mesh: 50mmX100mm, 50mmX200mm. The mesh is equipped with V-shaped reinforcing ribs, which can greatly enhance the impact resistance of the fence. The column is made of 60X60 rectangular steel, with a V-shaped frame welded to the top. You can choose a 70mmX100mm hanging connection column. The products are all hot-dip galvanized and then electrostatically sprayed with high-quality polyester powder, using the world's most popular RAL colors. Weaving method: braided and welded.
Surface treatment: electroplating, hot plating, plastic spraying, plastic dipping.
Advantages: 1. It is beautiful, practical, and convenient for transportation and installation.
2. It should be adapted to the terrain during installation, and the connection position with the column can be adjusted up or down according to the unevenness of the ground;
3. Installing four bending reinforcements in the transverse direction of the bridge guardrail net will significantly increase the strength and beauty of the net surface while not increasing the overall cost. It is currently one of the most popular at home and abroad.
Main uses: used in airport closures, private areas, military areas, field fences, and development zone isolation nets.
Manufacturing process: pre-straightening, cutting, pre-bending, welding, inspection, framing, destructive testing, beautification (PE, PVC, hot dip), packaging, warehousing
Post time: May-20-2024