What is the difference between one inch dip welded mesh and traditional welded mesh?

What is the difference between one inch dip welded mesh and traditional welded mesh?

The one-inch dip-welded wire mesh is made of high-quality Q195 low-carbon steel wire, which is passivated and plasticized on the surface, and coated with PVC plastic layer. It has good adhesion to the wire mesh, smooth mesh surface, uniform mesh, and solder joints. Strong, good local processing performance, stable, corrosion-resistant, and colors can be customized according to actual requirements.

One inch dip welded mesh

Product process: One-inch dip-welded welded wire mesh is made of high-quality Q195 low-carbon steel wire. The surface is then passivated and plasticized with a PVC plastic coating. Good adhesion with wire mesh, smooth mesh surface, uniform mesh. The solder joints are firm, the local processing performance is good, stable, and the corrosion resistance is good. Color can be customized according to actual requirements.

General Specifications:

Wire diameter: 2.5-5.0mm

Mesh: 25.4-200mm

The maximum width can reach 3m, and the length can be customized according to the actual requirements of customers.

1. Knowledge and use of dipping powder

1. Polyethylene thermoplastic powder coatings, also known as polyethylene powder resin coatings, are anti-corrosion powder coatings prepared from high-pressure polyethylene (LDPE) as the base material and adding various functional additives and colorants. It has excellent impregnation properties coating. It has chemical resistance, aging resistance, impact resistance, bending resistance, acid resistance, salt spray corrosion resistance and good surface decoration performance.

2. Conventional impregnation conditions:

1. After the mesh is derusted and degreased, it is heated to 350±50°C (the specific heating temperature depends on the heat capacity of the mesh, which is determined by experiment).

2. The soaked mesh sheet enters the fluidized bed for 10-12 seconds, the temperature is raised to 150°C-230°C, the surface is taken out and leveled, and the dipped mesh sheet is obtained after cooling.

Another molded plastic powder that does not require a fluidized bed.

3. The main purpose:

Highway fence mesh, railway fence mesh, airport fence mesh, garden fence mesh, community fence mesh, villa fence mesh, civil house fence mesh, hardware craft frame, column cage, sports and fitness equipment, etc., park, community and other fences, bicycle baskets , Shelves, Hangers, Refrigerators, Grille Surface Coating.

4. Features:

The impregnated thickness is between 0.5-3mm, with strong impact resistance, longer protection period, beautiful and durable.

The colors of dip-welded mesh mainly include: dark green, grass blue, black, red, yellow and other colors for users to choose. This product adopts an advanced double-layer protection system to achieve very good adhesion, bright color and full color. Not only can greatly improve the service life of the mesh, but also improve the lack of decorative effect of hot-dip galvanized welded mesh.

Conventional dip-welded mesh:

Plastic-coated welded wire mesh is welded by electroplating or hot-dip iron wire, and then dip-coated with PVC powder through a high-temperature automatic production line. Mainly used for supermarket shelves, indoor and outdoor decoration, poultry breeding, flowers and trees. Fence nets, outdoor partition walls for villas and houses, the products have the characteristics of bright colors, beautiful appearance, anti-corrosion and anti-rust, non-fading, anti-ultraviolet and so on.

Our factory can produce plastic welded wire mesh products in various colors, mainly including: dark green, grass blue, black, red, yellow and other colors for users to choose. This product adopts an advanced double-layer protection system to achieve very good adhesion, bright color and full color.